600 AC/DC CLAMP METER MODEL CM600

CM600
600 Amps AC/DC Current Clamp Meter CM600 Features

• Clamp opens up to 1 inch (25.4 mm) .
• One rotary switch operation.
• Large 4 digit LCD display.
• AC/DC Voltage measurement up to 600 Volt.
• AC/DC current measurement up to 600 A.
• Relative measurement
• One touch auto zero.
• Peak Hold Function
• Data Hold Function
• Resistance measurement.
• 2 readings per second sampling
• Continuity check with audible indicator.
• Protective hand guard.
• Low battery indicator.
• Auto power off.
• 50 hrs in use battery life.
• Soft carrying deluxe pouch.
• Test leads and batteries included

CM600 Applications

• Measure currents in circuits like battery chargers, alternators, starter motors, electrical loads, etc.
• Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
• Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
• An essential tool for all around troubleshooting of electrical and electronic circuit and systems.

Ergonomic Features:

• The new smaller and ergonomic profile compared with previous models makes handling and operation easier and more convenient
• Large easy to read 0.393" (10 mm) digits display
• Single knob selects functions
• Peak hold function
• Display data hold
• Rugged plastic enclosure
• Design allows comfortable handling
  

For use in:

• Electronic and electrical circuits
• Automobiles
• Trucks
• Trailers
• Boats
• RVs
• All 0 to 600 Volt AC/ DC powered circuits.

Technical Specifications :

General Specifications:

• Display:

• 4 Digit LCD (Max reading 600.0)
• 0.393"(10 mm) Digits
• Units indicator
• Relative measure indicator
• Display data hold indicator
• Peak hold indicator
• VDC/VAC indicator
• Continuity indicator
• Automatic over-range indication
• Automatic( - ) negative polarity indicator
• One touch button auto zeroing
• Auto power off
• Low battery indicator

• Power source: Two (2) Standard AAA 1.5 Volt alkaline battery type AAA UM4 or equivalent
• Test probes: One red and one black, 1000V/15A rated (IEC1010/EN61010 CAT II), 35½" long
• Physical dimensions: 7.44” (H) x 2.75” (W) x 1.33” (D) - 189mm (H) x 70 mm (W) x 34 mm (D)
• Weight: Approximately 7.76 Oz ( 220 g) Including battery

Electrical Specifications:

• DC Voltage: ± 1% ± 2 dgts., 600 V ac/dc maximum, 660Vrms overload protection
• AC Voltage: ±1.5% ± 5 dgts., 50 to 200 Hz, 600 V ac/dc maximum, 600Vrms overload protection
• DC Current: ± 2.5 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection
• AC Current: ± 2 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection
• Resistance: ±1% ± 3 dgts., 660Vrms overload protection
• Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 100 Ω, max. voltage test <>