Monday, August 13, 2007

LOW AMPERAGE CLAMP METER 1mA to 100 AMPS AC/DC




CM100 Features
  • Small jaw: 1.2"(W) x 0.53" (D) (300x13.4mm)
  • Clamp opens up to 1/2 inch (12.5 mm) .
  • One rotary switch operation.
  • Large 4 digit LCD display.
  • AC/DC Voltage measurement up to 600 Volt.
  • AC/DC current measurement from 0.001 up to 100 A.
  • Relative measurement
  • One touch auto zero.
  • Peak Hold Function
  • Data Hold Function
  • Resistance measurement.
  • 2 readings per second sampling
  • Continuity check with audible indicator.
  • Protective hand guard.
  • Low battery indicator.
  • Auto power off.
  • 50 hrs in use battery life.
  • Soft carrying deluxe pouch.
  • Test leads and batteries included.

CM100 Applications

  • Measure currents in circuits like battery chargers, alternators, leakage currents, electrical loads, etc.
  • Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
  • Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
  • An essential tool for all around troubleshooting of electrical and electronic circuit and systems


Ergonomic Features:
  • N new smaller jaws and ergonomic profile.
  • Large easy to read 0.393" (10 mm) digits display
  • Single knob selects functions
  • Peak hold function
  • Display data hold
  • Rugged plastic enclosure
  • Design allows comfortable handling
For use in:
  • Electronic and electrical circuits
  • Automobiles
  • Trucks
  • Trailers
  • Boats
  • RVs
  • All 0 to 600 Volt AC/ DC powered circuits.
Technical Specifications :

General Specifications:

  • Display:
  • 4 Digit LCD (Max. reading 9999)
  • 0.393"(10 mm) Digits
  • Units indicator
  • Relative measure indicator
  • Display data hold indicator
  • Peak hold indicator
  • VDC/VAC indicator
  • Continuity indicator
  • Automatic over-range indication
  • Automatic( - ) negative polarity indicator
  • One touch button auto zeroing
  • Auto power off
  • Low battery indicator
  • Power source: Two (2) Standard AAA 1.5 Volt alkaline battery
  • Test probes: One red and one black, 1000V/15A rated
  • Physical dimensions: 7.95” (H) x 2.62” (W) x 1.33” (D)
  • Weight: Approximately 6.34 Oz ( 180 g) Including battery

Electrical Specifications:

  • DC Voltage: ± 2% ± 2 dgts., 600 V ac/dc maximum
  • AC Voltage: ±1.5% ± 5 dgts., 50 to 500 Hz, 600 V ac/dc maximum
  • DC Current: ± 2.5 % ± 10 dgts., 100 Amp. maximum
  • AC Current: ± 2 % ± 10 dgts., 600 Amp. maximum
  • Resistance: ±1% ± 3 dgts., 100KΩ
  • Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 1000 Ω <>

No comments: